How to Access MikroTik on the Web?

Accessing your MikroTik router via the web interface is a straightforward process that allows you to manage your network settings, monitor traffic, and configure various features. Whether you’re setting up a new router or managing an existing one, this guide will take you through the steps to access MikroTik on the web.

Step 1: Connect to Your MikroTik Router

Before you can access the MikroTik web interface, ensure that your device is connected to the router. You can connect through a wired Ethernet connection or via Wi-Fi. If you are using a wired connection, simply plug your Ethernet cable into one of the LAN ports on the MikroTik device.

Step 2: Find the Router’s IP Address

By default, MikroTik routers typically use the IP address 192.168.88.1. To confirm this, you can check the documentation that came with your router or follow these steps:

1. Open a command prompt (Windows) or terminal (macOS/Linux).

2. Type the following command:

   ipconfig   # for Windows

   or

   ifconfig   # for macOS/Linux

3. Look for the default gateway, which is usually the router’s IP address.

Step 3: Open a Web Browser

Once you have the IP address, open your preferred web browser (Chrome, Firefox, etc.). In the address bar, type the IP address of your MikroTik router:

http://192.168.88.1

Press Enter. If everything is set up correctly, you should see the MikroTik login page.

Step 4: Log In to Your MikroTik Router

On the login page, you will be prompted to enter your username and password. The default username is typically admin, and the password field is usually left blank. Enter the credentials:

• Username: admin
• Password: (leave blank)

Click the “Log In” button. If you’ve changed the default credentials, use your custom username and password.

Step 5: Navigate the Web Interface

After logging in, you will be directed to the MikroTik web interface. The interface may look overwhelming at first, but it is organized into various sections:

• Dashboard: Provides an overview of your router’s status.
• Interfaces: Manage your network interfaces.
• IP: Configure IP addresses and DHCP settings.
• Firewall: Set up security rules.
• Users: Manage user access to the router.

Step 6: Configure Your Settings

Now that you are inside the MikroTik web interface, you can start configuring your router. For example, to change the Wi-Fi password, follow these steps:

1. Go to the Wireless section.
2. Select the Security Profiles tab.
3. Choose the wireless security profile you want to edit.
4. Under the WPA2 Pre-Shared Key field, enter your new password.
5. Click Apply or OK to save your changes.

Step 7: Log Out Securely

Once you have finished your configuration, it is important to log out of the web interface to maintain security. Click on the Log Out button, typically found in the upper right corner of the interface.

Accessing your MikroTik router via the web interface is a simple process that enables you to manage your network settings efficiently. With the steps outlined above, you can quickly log in to your router, configure settings, and ensure your network runs smoothly. Always remember to secure your router with a strong password and keep your firmware updated to protect against vulnerabilities.

For more tips and tricks on network management, stay tuned to our blog at dropvps.com!